Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSAUDI2008A3 BASE, 2.0 E, AUTOMATIC DCTREPAIR AND DIAGNOSISTRANSMISSIONTRANSMISSION CONTROL SYSTEMSCONTROLS, HOUSING - DIRECT SHIFT AUTOMATIC TRANSMISSION 02E FWD34 CONTROLS, HOUSINGSPECIAL TOOLS
2008 Audi A3 Base, 2.0 E, Automatic DCT
Special Tools
2008 Audi A3 Base, 2.0 E, Automatic DCTSECTION Special Tools
Special tools and workshop equipment required
- Engine Support Bridge 10 - 222 A
- Hose Clamps Up to 25 mm Dia. 3094
- Transmission Support 3282
- Pin 3282/29
- Adjusting Plate 3282/42 A
- Engine/Transmission Jack V.A.G 1383 A
Special tools and workshop equipment required
- Holding Plate VW 309
- Holding Fixture VW 313
- Transmission Support VW 353
- Holding Fixture VW 540
Special tools and workshop equipment required
- Engine Support Bridge 10 - 222 A
- Pry Lever - Rmv Outside Mirror 80 - 200
- Transmission Support 3282
- Pin 3282/29
- Adjusting Plate 3282/42 A
- Engine Support Device 3300 A
Special tools and workshop equipment required
- Shop Crane VAS 6100
- Bracket T10013
- Oil Collecting and Extracting Device V.A.G 1782
- Vehicle Diagnosis Tester, for example, Vehicle Diagnosis, Testing and Information System VAS 5051B
- Adapter for Oil Filling VAS 6262 A
- Hose Clamp Pliers V.A.G 1275
- Release Tool T40203
- Pry Lever - Rmv Outside Mirror 80 - 200
- Bracket 2024 A /1
- Engine Support Device 3300 A
- Engine Bung Set VAS 6122
- Support T10036
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.