Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Transmission, Securing In Engine/Transmission Holder
Special tools and workshop equipment required
- Holding Plate VW 309
- Holding Fixture VW 313
- Transmission Support VW 353
- Holding Fixture VW 540
Attach Transmission Horizontally
-- Secure transmission on the VW 540 -arrows- and place in the VW 313 or the engine and transmission holder VAS 6095.
-- Use the shop crane VAS 6100 for installation. Refer to TRANSMISSION, TRANSPORTING .
Center of gravity of transmission is outside center of rotation at holding fixture. To prevent back swing, a second technician must hold transmission housing when rotating the transmission on the transmission support.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.