Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Special Tools
Special tools and workshop equipment required
- Oil Collecting and Extracting Device V.A.G 1782
- Puller T10037
- Socket and Extended Bit T10107
Special tools and workshop equipment required
- Thrust Plate VW 401
- Thrust Plate VW 402
- Punch VW 407
- Thrust Disc VW 412
- Subframe Support Assembling Device VAS 3253
- Assembly Tool T10047
Special tools and workshop equipment required
- Tapered Roller Bearing Puller V.A.G 1582
- Attachment V.A.G 1582/6A
- Torque Wrench V.A.G 1601
- -1- Kukko 20/10 two-arm puller
- Kukko 45-2 three arm puller
Special tools and workshop equipment required
- Holding Fixture VW 313
- Tube 42 mm Dia. VW 516
- Thrust Piece 40 - 105
- Thrust Piece T10049
- Transmission Holder T10108
- Stop Plate T10108/1
Special tools and workshop equipment required
- Pulling Hook T20143
- Sleeve VW 423
- Thrust Piece T10243
- Thrust Piece T10298
- Thrust Piece 3305
- Slide Hammer-Complete Set VW 771
- Additional Part for VW 771 VW 771/37
Edition 07202010
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.