Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSAUDI2008A3 BASE, 2.0 E, AUTOMATIC DCTREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 5 (3.2L - GENERIC SCAN TOOL - ENGINE CODE(S): BUB)ST GENERIC SCAN TOOLDESCRIPTION AND OPERATIONIGNITION SYSTEMTEST DATA, SPARK PLUGS
2008 Audi A3 Base, 2.0 E, Automatic DCT
Test Data, Spark Plugs
2008 Audi A3 Base, 2.0 E, Automatic DCTSECTION Test Data, Spark Plugs
WARNING: This page is about a different car, the 2007 Audi A3 and 2006 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
| Engine code | BUB | |
|---|---|---|
| Engine Control Module (ECM) System identification | Motronic ME 9.1 | |
| Engine idle speed | 600 to 700 RPM (not adjustable) | |
| Engine speed (RPM) limitation | Starting at approx. 6500 RPM | |
| Ignition sequence | 1-5-3-6-4-2 | |
| Ignition timing | Not adjustable, regulated by Electronic control module | |
| Ignition system | Single coil ignition system with 6 ignition coils (output stages integrated) that are connected directly to spark plugs via the ignition cables. | |
| Spark plugs | 101 905 600 | |
| Spark plug gap | 1.0 to 1.1 mm | |
| Tightening torque | 25 Nm | |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.