Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSAUDI2008A3 BASE, 2.0 E, AUTOMATIC DCTREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 14 (2.0L - ENGINE ASSEMBLY - ENGINE CODE(S): CBEA)10 ENGINE ASSEMBLYDESCRIPTION AND OPERATIONSUBFRAME ASSEMBLY OVERVIEWNOTES
2008 Audi A3 Base, 2.0 E, Automatic DCT
SUBFRAME Assembly Overview: Notes
2008 Audi A3 Base, 2.0 E, Automatic DCTSECTION Notes
WARNING: This page is about a different car, the 2013 Audi A3, 2012 Audi A3, 2011 Audi A3, and 2010 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
- Bolt
- Transmission support to transmission
- Tightening specifications , refer to DESCRIPTION AND OPERATION
- Bolts
- Pendulum supports to transmission
- Tightening specifications , refer to DESCRIPTION AND OPERATION
- Engine Support
- Illustration does not correspond to version in vehicle
- Bolt
- Replace
- Engine support to engine
- Tightening specification and sequence SUBFRAME ASSEMBLY OVERVIEW
- Engine Mount
- With support arm
- Bolt
- Replace
- 40 Nm plus an additional 90° turn
- Engine mount to body
- Bracket
- Bolt
- Replace
- 20 Nm plus an additional 90° turn
- Bracket to engine mount
- Bolt
- Replace
- 20 Nm plus an additional 90° turn
- Bracket to body
- Bolt
- Replace
- 40 Nm plus an additional 90° turn
- Engine mount to body
- Bolts
- Replace
- 60 Nm plus an additional 90° turn
- Engine mount to engine support
- Pendulum Supports
- Bolt
- Pendulum supports to subframe
- Tightening specifications , refer to DESCRIPTION AND OPERATION
- Bolt
- Transmission mount to transmission support
- Tightening specifications , refer to DESCRIPTION AND OPERATION
- Bolt
- Transmission mount to body
- Tightening specifications , refer to DESCRIPTION AND OPERATION
- Transmission Mount
- With support arm
- Bolt
- Transmission support to transmission
- Tightening specifications , refer to DESCRIPTION AND OPERATION
- Bolt
- Transmission support to transmission
- Tightening specifications , refer to DESCRIPTION AND OPERATION
- Transmission Support
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.