Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSAUDI2008A3 BASE, 2.0 E, AUTOMATIC DCTREPAIR AND DIAGNOSIS (SINGLE PAGE)ENGINE PERFORMANCEIGNITION SYSTEM2.0L - GENERAL, TECHNICAL DATA - ENGINE MECHANICAL - ENGINE CODE(S): CBFA & CCTA00 GENERAL, TECHNICAL DATASPECIFICATIONSENGINE DATA
2008 Audi A3 Base, 2.0 E, Automatic DCT
Engine Data
2008 Audi A3 Base, 2.0 E, Automatic DCTSECTION Engine Data
| Engine Code | CBFA | CCTA | |
|---|---|---|---|
| Displacement | liter | 1.984 | 1.984 |
| Output | kW at RPM | 147/5000 | 147/5000 |
| Torque | Nm at RPM | 280/1700 | 280/1700 |
| Bore | dia. mm | 82.5 | 82.5 |
| Stroke | mm | 92.8 | 92.8 |
| Compression ratio | 10.3 | 9.6 | |
| RON | 98 1) | 98 1) | |
| Fuel injection and ignition system | FSI | FSI | |
| Ignition sequence | 1-3-4-2 | 1-3-4-2 | |
| Knock control | yes | yes | |
| Turbocharger | yes | yes | |
| Exhaust gas recirculation | no | no | |
| Variable intake manifold | no | no | |
| Variable valve timing | yes | yes | |
| Secondary air injection (AIR) | yes | no | |
|
|||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.