Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSAUDI2007RS4 QUATTRO SEDAN (8EC) V8-4.2L (BNS)REPAIR AND DIAGNOSISLIGHTING AND HORNSSERVICE AND REPAIRINTERIOR SWITCHESDRIVER POWER WINDOW SWITCH, TWO SWITCHES
2007 Audi RS4 Quattro Sedan (8EC) V8-4.2L (BNS)
Driver Power Window Switch, Two Switches
2007 Audi RS4 Quattro Sedan (8EC) V8-4.2L (BNS)SECTION Driver Power Window Switch, Two Switches
Driver Power Window Switch, Two Switches
Removing
- Remove front door trim.
- Use small screwdriver to carefully release fasteners - arrows -.
- Pull window switch downwards out of door trim.
- Disconnect electrical connection - 2 - at window switch - 1 -.
Installing
Install in reverse order of removal, noting the following:
- Press window switch into switch mounting until retaining hooks engage.
- Install front door trim.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.