Steering Column Switch Module Assembly Overview

Steering Column Switch Module Assembly Overview





1 Coil Connector with Slip Ring

• Removing and installing, refer to => [ Airbag Spiral Spring/Return Spring with Slip Ring ] Airbag Spiral Spring/Return Spring with Slip Ring

CAUTION!
Coil connector with slip ring is not to be turned following removal.

2 Steering Angle Sensor (G85)

• Removing and installing, refer to => [ Steering Angle Sensor ] Steering Angle Sensor

3 Socket Head Bolt

• 0.65 Nm

4 Cruise Control Switch (E45)

• Removing and installing, refer to => [ Cruise Control Switch ] Cruise Control Switch

5 Socket Head Bolt

• 0.65 Nm

6 Turn Signal Switch (E2)

• Removing and installing, refer to => [ Turn Signal Switch ] Turn Signal Switch

7 Retainer

8 Steering Column Electronic Systems Control Module (J527)

• Removing and installing, refer to => [ Steering Column Electronic Systems Control Module ] Steering Column Electronic Systems Control Module

• Connector assignment of steering column electronic systems control module, refer to => [ Steering Column Electronic Systems Control Module, Front Side, Connector Assignment ] Steering Column Electronic Systems Control Module, Front Side, Connector Assignment

9 Clamping Bolt

• 3 Nm

10 Windshield Wiper/Washer Switch (E22)

• Removing and installing, refer to => [ Windshield Wiper/Washer Switch ] Windshield Wiper/Washer Switch

11 Socket Head Bolt

• 0.65 Nm

Tightening Specification, Steering Column Trim





1. Lower steering column switch trim

2. Upper steering column switch trim

3. Bolt - 0.6 Nm

4. Bolt - 0.6 Nm

5. Handle for manual steering column adjustment

6. Bolt - 3.5 Nm