Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Tire Pressure Monitoring Sensor Overview
2007 Audi A3 Base, Automatic DCTSECTION Tire Pressure Monitoring Sensor Overview
- Left Front Tire Pressure Monitoring Sensor -G222-, Right Front Tire Pressure Monitoring Sensor -G223-, Rear Left Tire Pressure Monitoring Sensor -G224- and Rear Right Tire Pressure Monitoring Sensor -G225-
- Temperature and pressure can be read via diagnosis with Vehicle Diagnostic, Measuring and Information System VAS 5051 B
- Replace the valve insert each time a tire is changed.
- Replace the union nut, valve insert, seal, sealing washer and valve cap if installing used tire pressure sensors.
- Removing and installing, refer to TIRE PRESSURE SENSOR .
- Valve Core
- Sealing Washer
- Seal
- Rim
- Tires, mounting and dismounting, refer to TIRES, CHANGING, WITH TIRE PRESSURE MONITORING SYSTEM .
- Union Nut
- 8 Nm
- Valve Cap
- Use only original valve caps from the repair set.
- Do not use Comfort valve caps and metal caps.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.