Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSAUDI2007A3 BASE, AUTOMATIC DCTREPAIR AND DIAGNOSIS (SINGLE PAGE)BRAKESPARKING BRAKE SYSTEMMECHANICAL COMPONENTS - BRAKE SYSTEM46 MECHANICAL COMPONENTSDESCRIPTION AND OPERATIONFRONTBRAKES, FN 3 ASSEMBLY OVERVIEWINSTALLED POSITION OF BRAKE PADS

2007 Audi A3 Base, Automatic DCT

Installed Position of Brake Pads

2007 Audi A3 Base, Automatic DCTSECTION Installed Position of Brake Pads

Fig 1: Identifying Right And Left Side Piston Brake Pad

Courtesy of AUDI OF AMERICA, LLC

1 - right brake pad, piston side

2 - left brake pad, piston side

NOTE:

In installed position, the arrow on the backing plate of the brake pad must point downward

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.