Anti-Lock Brake/Electronic Stabilization Program System At Front Axle Assembly Overview

2007 Audi A3 Base, Automatic DCTSECTION Anti-Lock Brake/Electronic Stabilization Program System At Front Axle Assembly Overview
Fig 1: Anti-Lock Brake/Electronic Stabilization Program System At Front Axle Assembly Overview
GWWA45-0185Courtesy of AUDI OF AMERICA, LLC
  1. Cap Bolt, refer to SPECIFICATIONS
  2. Wheel Bearing Housing
  3. Wheel Speed Sensor
    • Removing and installing, refer to SPEED SENSOR AT FRONT AXLEΒ 
    • Before inserting sensor, clean inner surface of hole and coat with grease G 000 650
  4. Hex Socket Head Bolt
    • 8 Nm
  5. Wheel Bearing Unit
  6. Cover Plate
  7. Bolt
  8. Brake Disc
  9. Bolt
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.