SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSAUDI2005A6 3.2 TREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 97 (4.2L - GENERIC SCAN TOOL, ENGINE CODE(S): BVJ (ST-GENERIC SCAN TOOL))ST - GENERIC SCAN TOOLDIAGNOSTIC TROUBLE CODE TABLESSAE U0XXX DTCSCONTROL MODULE AND OUTPUT SIGNALS
2005 Audi A6 3.2 T

Control module and output signals

2005 Audi A6 3.2 TSECTION Control module and output signals
WARNING: This page is about a different car, the 2011 Audi A6, 2010 Audi A6, 2009 Audi A6, 2008 Audi A6, and 2007 Audi A6. However, it is still accessible from the selected car via links, so may be relevant.
DTC Error Message Diagnostic Procedure Malfunction Criteria and Threshold Value Secondary Parameters with Enable Conditions Monitoring Time Length Frequency of checks, MIL Illum
U0001 High Speed CAN Communication Bus CAN message, No feedback    
  • Continuous
  • 2 DCY
U0101 Lost Communication with TCM Not active   0.5 Seconds
  • Continuous
  • 2 DCY
U0402 Invalid Data Received from Transmission Control Module Invalid data received from TCM   0.5 Seconds
  • Continuous
  • 2 DCY
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.