Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Fastener Tightening Specifications
2005 Audi A6 3.2 TSECTION Fastener Tightening Specifications
| Component | Fastener Size | Nm | ||
|---|---|---|---|---|
| Accelerator Pedal Module Mounting Bolt | ||||
| - Version 1 | - | 9 | ||
| - Version 2 | - | 8 | ||
| EVAP Canister Cover Mounting Bolt | - | 19 | ||
| Fuel Delivery Unit and Fuel Level Sensor Union Nut (1) | - | 120 | ||
| Fuel Filler Neck and Ground Connection Mounting Bolt | - | 23 | ||
| Fuel Filter to Bracket Mounting Bolt | - | 1.2 | ||
| Fuel Pump Control Module Bracket to Body Mounting Bolt | - | 4 | ||
| Fuel Tank Securing Strap Mounting Bolt | - | 23 | ||
| Heat Shield for Fuel Tank Mounting Nut | - | 2 | ||
| Leak Detection Pump (LDP) Mounting Nut | - | 4 | ||
| Suspended Mount for Exhaust System Mounting Bolt | - | 232 | ||
|
||||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.