Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSAUDI2004A6 QUATTRO SEDAN (4B2) V8-4.2L (AWN)REPAIR AND DIAGNOSISBODY AND FRAMESEATSPOWER SEAT CONTROL MODULESERVICE AND REPAIR
2004 Audi A6 Quattro Sedan (4B2) V8-4.2L (AWN)
Power Seat Control Module: Service and Repair
2004 Audi A6 Quattro Sedan (4B2) V8-4.2L (AWN)SECTION Service and Repair
Control Module For Power Seat With Memory, Removing And Installing
NOTE: The control module for power seat memory is under the driver's seat.
- Remove seat.
- Remove inner side panel of seat.
- Disconnect connectors - 4 - and - 5 -.
- Remove screw - 2 -.
Tightening torque 1.5 Nm (13.5 in.lb)
- Press clip - 3 - in direction of arrow using a screwdriver.
- Remove control module for power seat memory - 1 -.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.