Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSAUDI2004A6 QUATTRO SEDAN (4B2) V8-4.2L (AWN)REPAIR AND DIAGNOSISBODY AND FRAMELOCKSPOWER LOCKSTESTING AND INSPECTIONSCAN TOOL TESTING AND PROCEDURESSCAN TOOL CONNECTING AND INITIAL CHECKSCHECK CONTROL MODULE VERSIONS (FUNCTION 01)
2004 Audi A6 Quattro Sedan (4B2) V8-4.2L (AWN)
Check Control Module Versions (Function 01)
2004 Audi A6 Quattro Sedan (4B2) V8-4.2L (AWN)SECTION Check Control Module Versions (Function 01)
Check Control Module Versions (function 01)
- Press keys 0 and 1.
Indicated on display:
Rapid data transfer Q
01 - Check Control Module Versions
- Confirm entry with Q key.
- Indicated on display (vehicles with no anti-theft alarm):
4B0962258D Central locking Dxx ->
Code 4672 WSC�06812
- Indicated on display (vehicles with anti-theft alarm):
4B0962258E Central locking, ATW DXX ->
Code 4682 WSC 06812
Explanatory notes on display:
- 4B0962258D: Number of central locking control module
- 4B0962258E: Number of central locking control module
- Central locking: Component designation and version
- Central locking, ATW: Component designation and version
- Dxx: Software version
- Code 4672: Coding. Code Control Module (Function 07)
- Code 4682: Coding. Code Control Module (Function 07)
- WSC 06812: Workshop code
- Pressing -> key effects return to basic function.
Indicated on display:
Rapid data transfer HELP
Select function XX
- Press keys 0 and 6 to end output.
Indicated on display:
Rapid data transfer Q
06 - End Output
- Confirm entry with Q key.
Indicated on display:
Rapid data transfer HELP
Enter address word XX
- Switch off ignition.
- Unplug connectors to VAG 1551 Scan Tool (ST).
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.