Code Control Module (Function 07)

Code Control Module (Function 07)


NOTE:
- As-delivered control modules are precoded.
- Coding is performed with VAG 1551 Scan Tool (ST).


If V.A.G 1551 does not display appropriate code or if control module is replaced, perform control module coding as follows:

Implementing function "07 - Code Control Module"

Indicated on display:


Rapid data transfer HELP
Select function XX


- Press keys 0 and 7.

Indicated on display:


Rapid data transfer Q
07 - Code Control Module


- Confirm entry with Q key.

Indicated on display:


Code Control Module
Enter code number XXXXX (0-32000)


- Use keypad to enter central locking control module code as per table:

In addition to basic coding, it is possible to offer the following option:
- Vehicle automatically locks upon reaching a speed of about 15 km/h (10 mph) and unlocks when key is removed from ignition.

Coding table
Standard Code 15885
Optional Code 15917

Code 15885

Indicated on display:


Code Control Module Q
Enter code 15885 (0-32000)


- Confirm entry with Q key.

- Control module identification appears on display together with code entered.


4B0962258E Central locking, ATW D30 ->
Code 15885 WSC 08812


NOTE: Explanatory notes on display. Check Control Module Versions (Function 01)


- Press -> key.

Indicated on display:


Rapid data transfer HELP
Select function XX


- End Output (function 06). Refer to "Driver's Seat Adjustment With Memory Control Module, on Board Diagnostic (OBD)/Clearing Trouble Codes/With Manufacturer Scan Tool/End Output (Function 06)",