Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Control Module Versions, checking (function 01)
2004 Audi A6 BaseSECTION Control Module Versions, checking (function 01)
Indicated on display
Fig 1: VAG1551 Scan Tool Display - Control Module Versions, Checking, Multi-Function Steering Wheel (1 Of 3)
- Press buttons -0- and -1- to select "Check control module" function 01.
Indicated on display
Fig 2: VAG1551 Scan Tool Display - Control Module Versions, Checking, Multi-Function Steering Wheel (2 Of 3)
- Press -Q- button to confirm input.
Indicated on display after approx. 5 seconds (example only):
Fig 3: VAG1551 Scan Tool Display - Control Module Versions, Checking, Multi-Function Steering Wheel (3 Of 3)
- Part number of steering wheel electronics
- Steering wheel electronics: component marking
- D03: Software version of control module
- Coding 00101: Multi-function steering wheel control module coding
- XXXXX: Workshop number
- Press --> button.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.