SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSAUDI2004A6 BASEREPAIR AND DIAGNOSISACCESSORIES & EQUIPMENTINFOTAINMENTON BOARD DIAGNOSTIC (OBD) - RADIO, NAVIGATION, STEERING & TELEMATICSMULTI-FUNCTION STEERING WHEEL, ON BOARD DIAGNOSTIC (OBD)CODE CONTROL MODULE (FUNCTION 07)CODE CONTROL MODULE, INITIATING
2004 Audi A6 Base

Code control module, initiating

2004 Audi A6 BaseSECTION Code control module, initiating
NOTE: The correct coding value depends on the part number suffix of the installed multi-function steering wheel control module.

Indicated on display:

Fig 1: VAG1551 Scan Tool Display - Code Control Module, Initiating - Multi-Function Steering Wheel (1 Of 9)
G02719378Courtesy of AUDI OF AMERICA, INC.
  • Press buttons -0- and -1- to select "Check control module" function 01.

Indicated on display

Fig 2: VAG1551 Scan Tool Display - Code Control Module, Initiating - Multi-Function Steering Wheel (2 Of 9)
G02719379Courtesy of AUDI OF AMERICA, INC.
  • Press -Q- button to confirm input.

Indicated on display after approx. 5 seconds (example only):

Fig 3: VAG1551 Scan Tool Display - Code Control Module, Initiating - Multi-Function Steering Wheel (3 Of 9)
G02719380Courtesy of AUDI OF AMERICA, INC.
  • Make note of control module part number suffix.
  • Press --> button.

Indicated on display

Fig 4: VAG1551 Scan Tool Display - Code Control Module, Initiating - Multi-Function Steering Wheel (4 Of 9)
G02719381Courtesy of AUDI OF AMERICA, INC.
  • Press buttons -0- and -7- to select "Code Control Module" function 07.

Indicated on display:

Fig 5: VAG1551 Scan Tool Display - Code Control Module, Initiating - Multi-Function Steering Wheel (5 Of 9)
G02719382Courtesy of AUDI OF AMERICA, INC.
  • Confirm input using the -Q- button.

Indicated on display:

Fig 6: VAG1551 Scan Tool Display - Code Control Module, Initiating - Multi-Function Steering Wheel (6 Of 9)
G02719383Courtesy of AUDI OF AMERICA, INC.
  • Enter code number according to part number Index tables:

    Coding through m.y. 2001. See  Coding tables through m.y. 2001   . 

    Coding from m.y. 2002. See  Coding tables from m.y. 2002   . 

    Coding example - control module suffix "C": 00101 

    • First digit: 0 = Standard
    • Second digit: 0 = Standard
    • Third digit; language version: 1 = English
    • Fourth digit; Tiptronic: 0 = without Tiptronic
    • Fifth digit; steering wheel version: 1 = Radio & Telephone operation
  • Confirm input using the -Q- button.
  • Control module identification will appear on the display together with the coding that was entered (00101.)
    Fig 7: VAG1551 Scan Tool Display - Code Control Module, Initiating - Multi-Function Steering Wheel (7 Of 9)
    G02719384Courtesy of AUDI OF AMERICA, INC.
  • End coding by pressing --> button.

Indicated on display:

Fig 8: VAG1551 Scan Tool Display - Code Control Module, Initiating - Multi-Function Steering Wheel (8 Of 9)
G02719385Courtesy of AUDI OF AMERICA, INC.
  • Press buttons -0- and -6- to select "End output" function 06.

Indicated on display:

Fig 9: VAG1551 Scan Tool Display - Code Control Module, Initiating - Multi-Function Steering Wheel (9 Of 9)
G02719386Courtesy of AUDI OF AMERICA, INC.
  • Press -Q- button to confirm input.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.