Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSAUDI2004A6 BASEREPAIR AND DIAGNOSISACCESSORIES & EQUIPMENTENTERTAINMENT SYSTEMSRADIO, TELEPHONE, NAVIGATION, TRIP COMPUTERMULTI-FUNCTION STEERING WHEELMULTI-FUNCTION STEERING WHEEL SWITCHES, REMOVING AND INSTALLINGMULTI-FUNCTION SWITCHES, REMOVING AND INSTALLINGREMOVING
2004 Audi A6 Base
Multi-function switches, removing and installing: Removing
2004 Audi A6 BaseSECTION Removing
- Adjust steering wheel as far out and up as possible.
- Disconnect battery negative (-) terminal.
- Remove airbag unit
See appropriate Air Bag Restraint Systems article in Restraints.
- Carefully flip airbag unit forward.
- Carefully disconnect electrical connector -2-. See Fig 1.
- Remove screws -1- and -3- (1 Nm).
- Remove switch toward front.
- Remove switch assembly -4- in direction of -arrow-.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.