SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSAUDI2001A6 AVANT QUATTROREPAIR AND DIAGNOSISENGINE PERFORMANCESYSTEMON BOARD DIAGNOSTIC (OBD) - 2.8L V6 ATQON BOARD DIAGNOSTIC (OBD)CHECK DTC MEMORY (FUNCTION 02) AND ERASE DTC MEMORY (FUNCTION 05)END OUTPUT
2001 Audi A6 Avant Quattro

End Output

2001 Audi A6 Avant QuattroSECTION End Output

When indicated on display:

Fig 1: Identifying VAG1551 Scan Tool Display - Check DTC Memory And Erase DTC Memory (7 Of 8)
G03611927
  • Press buttons -0- and -6- to select "End output" and press -Q- button to confirm input.

When indicated on display:

Fig 2: Identifying VAG1551 Scan Tool Display - Check DTC Memory And Erase DTC Memory (8 Of 8)
G03611928
  • Switch off ignition and disconnect diagnostic cable.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.