Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Function Mode 08: Reading Measured Value Block
When RAPID DATA TRANSFER SELECT FUNCTION XX is displayed, press 0 then 8 (08). RAPID DATA TRANSFER 08-READ MEASURING VALUE BLOCK will be displayed. Press "Q" key to confirm input. Select display group to be observed. For central locking and anti-theft system, see Fig 1 -Fig 9 . For ultrasonic interior monitoring for anti-theft system, see Fig 10 or Fig 11 . Enter display group. Press "Q" key to confirm input. After completing test, press right arrow key to return to select function mode.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.