SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSAUDI2001A6 AVANT QUATTROREPAIR AND DIAGNOSIS (SINGLE PAGE)BODY & FRAMESEATSON BOARD DIAGNOSTIC (OBD) - CENTRAL LOCKING SYSTEM, MEMORY SEATS, ULTRASONIC INTERIOR MONITORFRONT PASSENGER SEAT ADJUSTMENT WITH MEMORY CONTROL MODULE, ON BOARD DIAGNOSTIC (OBD)CHECK CONTROL MODULE VERSIONS (FUNCTION 01)
2001 Audi A6 Avant Quattro

Check Control Module Versions (function 01)

2001 Audi A6 Avant QuattroSECTION Check Control Module Versions (function 01)
  • Press buttons -0- and -1-.

Indicated on display:

Fig 1: V.A.G 1551 Scan Tool (ST) Display - Front Passenger Seat Adjustment With Memory Control Module, Checking Control Module Versions (Function 01) (1 Of 3)
G02718723Courtesy of AUDI OF AMERICA, INC.
  • Confirm entry with -Q- button.
  • Indicated on display:
    • Fig 2: V.A.G 1551 Scan Tool (ST) Display - Front Passenger Seat Adjustment With Memory Control Module, Checking Control Module Versions (Function 01) (2 Of 3)
    G02718724Courtesy of AUDI OF AMERICA, INC.

Explanatory notes on display: 

  • 4B0959760C: Control module number
  • Seat memory R1_BF: Component designation of control module for front passenger seat
  • 0302: Software version of control module
  • Code 00003: Coding. See CODE CONTROL MODULE (FUNCTION 07)  .
  • WSC 06812: Workshop code
  • Pressing --> button effects return to basic function.

Indicated on display:

Fig 3: V.A.G 1551 Scan Tool (ST) Display - Front Passenger Seat Adjustment With Memory Control Module, Checking Control Module Versions (Function 01) (3 Of 3)
G02718725Courtesy of AUDI OF AMERICA, INC.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.