Check Control Module Versions (function 01)

2001 Audi A6 Avant QuattroSECTION Check Control Module Versions (function 01)
  • Press buttons -0- and -1-.

Indicated on display:

Fig 1: V.A.G 1551 Scan Tool (ST) Display - Central Locking System, Check Control Module Versions (Function 01) (1 Of 6)
G02718534Courtesy of AUDI OF AMERICA, INC.
  • Confirm entry with -Q- button.
  • Indicated on display (vehicles with no anti-theft alarm):
    Fig 2: V.A.G 1551 Scan Tool (ST) Display - Central Locking System, Check Control Module Versions (Function 01) (2 Of 6)
    G02718535Courtesy of AUDI OF AMERICA, INC.
  • Indicated on display (vehicles with anti-theft alarm):
    Fig 3: V.A.G 1551 Scan Tool (ST) Display - Central Locking System, Check Control Module Versions (Function 01) (3 Of 6)
    G02718536Courtesy of AUDI OF AMERICA, INC.

Explanatory notes on display:Β 

  • 4B0962258D: Number of central locking control module
  • 4B0962258E: Number of central locking control module
  • Central locking: Component designation and version
  • Central locking, ATW: Component designation and version
  • Dxx: Software version
  • Code 4672: Coding. See CODE CONTROL MODULE (FUNCTION 07)Β  .
  • Code 4682: Coding. See CODE CONTROL MODULE (FUNCTION 07)Β  .
  • WSC 06812: Workshop code
  • Pressing --> button effects return to basic function.

Indicated on display:

Fig 4: V.A.G 1551 Scan Tool (ST) Display - Central Locking System, Check Control Module Versions (Function 01) (4 Of 6)
G02718537Courtesy of AUDI OF AMERICA, INC.
  • Press buttons -0- and -6- to end output.

Indicated on display:

Fig 5: V.A.G 1551 Scan Tool (ST) Display - Central Locking System, Check Control Module Versions (Function 01) (5 Of 6)
G02718538Courtesy of AUDI OF AMERICA, INC.
  • Confirm entry with -Q- button.

Indicated on display:

Fig 6: V.A.G 1551 Scan Tool (ST) Display - Central Locking System, Check Control Module Versions (Function 01) (6 Of 6)
G02718539Courtesy of AUDI OF AMERICA, INC.
  • Switch off ignition.
  • Disconnect connectors to V.A.G 1551 Scan Tool (ST).
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.