SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSAUDI2001A6 AVANT QUATTROREPAIR AND DIAGNOSIS (SINGLE PAGE)ACCESSORIES & EQUIPMENTENTERTAINMENT SYSTEMSON BOARD DIAGNOSTIC (OBD) - RADIO, NAVIGATION, STEERING & TELEMATICSTELEMATICS, ON BOARD DIAGNOSTIC (OBD)CODE CONTROL MODULE (FUNCTION 07)CODE CONTROL MODULE, INITIATING
2001 Audi A6 Avant Quattro

Code Control Module, initiating

2001 Audi A6 Avant QuattroSECTION Code Control Module, initiating

Indicated on display:

Fig 1: VAG1551 Scan Tool Display - Code Control Module, Initiating, Telematics (1 Of 7)
G02719436Courtesy of AUDI OF AMERICA, INC.
  • Press buttons -0- and -7- to select "Code control module" function 07.

Indicated on display:

Fig 2: VAG1551 Scan Tool Display - Code Control Module, Initiating, Telematics (2 Of 7)
G02719437Courtesy of AUDI OF AMERICA, INC.
  • Press -Q- button to confirm input.

Indicated on display:

Fig 3: VAG1551 Scan Tool Display - Code Control Module, Initiating, Telematics (3 Of 7)
G02719438Courtesy of AUDI OF AMERICA, INC.
  • Enter seven digit code number according to table. See CODING TABLE:  .
  • Press -Q- button to confirm input.

Coding example: 0002333 

  • 000: = not used: always 000 (reserved)
  • 2 = Vehicle model: A6
  • 3 = Multi-function steering wheel & voice recognition
  • 3 = Navigation system IV
  • 3 = Radio system: Symphony/BOSE
  • Indicated on display (control module identification and coding entered)
    Fig 4: VAG1551 Scan Tool Display - Code Control Module, Initiating, Telematics (4 Of 7)
    G02719439Courtesy of AUDI OF AMERICA, INC.
  • Press --> button to end sequence.
  • The tester returns to "Select function" mode.

Indicated on display:

Fig 5: VAG1551 Scan Tool Display - Code Control Module, Initiating, Telematics (5 Of 7)
G02719440Courtesy of AUDI OF AMERICA, INC.
  • Press buttons -0- and -6- to select "End output" function 06.

Indicated on display:

Fig 6: VAG1551 Scan Tool Display - Code Control Module, Initiating, Telematics (6 Of 7)
G02719441Courtesy of AUDI OF AMERICA, INC.
  • Press -Q- button to confirm input.

Indicated on display

Fig 7: VAG1551 Scan Tool Display - Code Control Module, Initiating, Telematics (7 Of 7)
G02719442Courtesy of AUDI OF AMERICA, INC.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.