SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSAUDI1999A8 QUATTROREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 72 (ON BOARD DIAGNOSTIC (OBD) - RADIO, NAVIGATION, STEERING & TELEMATICS)RADIO, ON BOARD DIAGNOSTIC (OBD)ADAPTATION (FUNCTION 10)LONG WAVE RECEPTION, ENABLE/DISABLE (WHERE APPLICABLE)
1999 Audi A8 Quattro

Long wave reception, enable/disable (where applicable)

1999 Audi A8 QuattroSECTION Long wave reception, enable/disable (where applicable)
WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2005 Audi allroad, 2004 Audi allroad, 2004 Audi A6, 2003 Audi allroad, and 2003 Audi S6. However, it is still accessible from the selected car via links, so may be relevant.

Indicated on display:

Fig 1: VAG1551 Scan Tool Display - Long Wave Reception Enable/Disable, Radio (1 Of 7)
G02719148Courtesy of AUDI OF AMERICA, INC.
  • Press buttons -8- and -8- to select adaptation "channel 88".
    NOTE: False entries can be corrected by pressing the "C" button.
  • Press -Q- button to confirm input.

Indicated on display (example only):

Fig 2: VAG1551 Scan Tool Display - Long Wave Reception Enable/Disable, Radio (2 Of 7)
G02719149Courtesy of AUDI OF AMERICA, INC.

Top row of display indicates adaptation channel selected and system adaptation value (configuration) currently stored.

  • 0 = Long wave reception enabled
  • 1 = Long wave reception disabled
  • Press --> button.

Indicated on display (example only):

Fig 3: VAG1551 Scan Tool Display - Long Wave Reception Enable/Disable, Radio (3 Of 7)
G02719150Courtesy of AUDI OF AMERICA, INC.
  • Enter desired adaptation value (e.g.: 00001 or 00000)
  • 00000 = enables long wave reception
  • 00001 = disables long wave reception
  • Press -Q- button to confirm input.

Indicated on display:

Fig 4: VAG1551 Scan Tool Display - Long Wave Reception Enable/Disable, Radio (4 Of 7)
G02719151Courtesy of AUDI OF AMERICA, INC.
  • Press -Q- button to confirm input.

Indicated on display:

Fig 5: VAG1551 Scan Tool Display - Long Wave Reception Enable/Disable, Radio (5 Of 7)
G02719152Courtesy of AUDI OF AMERICA, INC.
  • Press -Q- button to confirm input.

Indicated on display:

Fig 6: VAG1551 Scan Tool Display - Long Wave Reception Enable/Disable, Radio (6 Of 7)
G02719153Courtesy of AUDI OF AMERICA, INC.
  • Press --> button.

Indicated on display:

Fig 7: VAG1551 Scan Tool Display - Long Wave Reception Enable/Disable, Radio (7 Of 7)
G02719154Courtesy of AUDI OF AMERICA, INC.
  • Press buttons -0- and -6- to select "End Output" function 06.
  • Press --> button.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.