Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Adjusting window
1999 Audi A8 BaseSECTION Adjusting window
- Adjust upper impact of window regulator -1- via external Torx(R) E6 (arrow).
- Adjust door window upper edge to interior seal lip. See ADJUSTING WINDOW
.
B- Area of door window at interior seal lip
- Adjust door window -2- with door closed.
- Adjust upper impact of window regulator so interior seal lip presses against door window seal -1- at upper window edge with pressure in entire area -B-. See ADJUSTING WINDOW
.
Dimension - a- = at least 1.0 mm
If door window is adjusted too high, greater force is required to shut door.
NOTE: A good seal is only guaranteed if the seal presses against the door window with at least 1.0 mm preload.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.