Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Selective Close Feature
The selective close feature makes it possible to open just the driver's or the passenger's door including the fuel filler flap without locking the rear doors and the rear lid. You can also open just the rear lid without unlocking any door and the fuel filler flap.
To unlock either the driver's door, the front passenger's door or the rear lid insert the key into the respective lock and turn it one time. If your want to unlock all the doors and the rear lid turn the key twice.
When the power locking system is actuated, all locking knobs on window sills should move simultaneously. If one knob does not move when locking doors, open that particular door and close it properly.
When the driver's door is open, you cannot lock it due to a mechanical lock. This feature helps to prevent you from being locked out of your vehicle. When you unlock the vehicle from the outside, wait until all locking knobs are raised before you open one of the doors. In the winder, it can take a few seconds until all knobs are raised.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.