Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
BOSE amplifier, removing and installing: Removing
1999 Audi A8 BaseSECTION Removing
- Remove frame for CD changer and/or telephone receiver/transmitter unit:
- "Delta" radio. See CD CHANGER - "DELTA" RADIO, REMOVING AND INSTALLING .
- "Concert" radio. See CD CHANGER - "CONCERT" RADIO, REMOVING AND INSTALLING
- "Symphony" radio. See CD CHANGER - "SYMPHONY" RADIO, REMOVING AND INSTALLING
- Remove screws -2- (3 Nm).
- If necessary, remove cable harness ties.
- Remove luggage compartment left side trim. See LUGGAGE COMPARTMENT TRIM, REMOVING .
- Remove two recessed hex-screws -2- (3 Nm) from frame -1-.
- Disconnect electrical connector -3- and lift out amplifier together with frame. See Fig 2 .
- Remove four recessed hex-screws -4- and detach amplifier from frame.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.