SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSAUDI1999A6 BASEREPAIR AND DIAGNOSIS (SINGLE PAGE)BRAKESTRACTION CONTROLBRAKE SYSTEM - ON BOARD DIAGNOSTIC (OBD) - ABS & ESPESP ON BOARD DIAGNOSTIC (OBD)CODE CONTROL MODULE (FUNCTION 07)CODING CONTROL MODULE
1999 Audi A6 Base

Coding control module

1999 Audi A6 BaseSECTION Coding control module

Indicated on display

Fig 1: VAG 1551 Scan Tool Display - Select Function XX
G02732546Courtesy of AUDI OF AMERICA, INC.
  • Press buttons -0- and -7- to select function "Code Control Module" and confirm with -Q- button.

Indicated on display

Fig 2: VAG 1551 Scan Tool Display - 07 - Code Control Module
G02732547Courtesy of AUDI OF AMERICA, INC.
  • Press -Q- button to confirm input.

Indicated on display

Fig 3: VAG 1551 Scan Tool Display - Enter Code Number XXXXX (0-32767)
G02732548Courtesy of AUDI OF AMERICA, INC.
  • Enter the required code number according to the following table and confirm entry with -Q- button.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.