Selecting & Entering Code

1999 Audi A4 Base, 1.8 B, AutomaticSECTION Selecting & Entering Code

Module can be coded according to possible function/equipment variations. Central locking systems come with or without remote control unit capabilities. Ultrasonic interior monitoring is for either sedan or station wagon.

Press 0 and 7 (07) to select code control module function. Press "Q" key to confirm input. CODE CONTROL MODULE ENTER CODE NUMBER XXXXX (0-32000) will be displayed. Choose proper standard code. See CENTRAL LOCKING CONTROL MODULE CODES  or ULTRASONIC INTERIOR MONITORING CONTROL MODULE CODES  table. Enter valid 5-digit code. Press "Q" key to confirm input. Press right arrow key to return to select function display.

CENTRAL LOCKING CONTROL MODULE CODES

Vehicle & System Type (1) Code
Standard Code
With Remote Control Unit 16140
Without Remote Control Unit 03340
Optional Code (2)
With Remote Control Unit 16172
Without Remote Control Unit 03372
(1) With concert radio.
(2) Vehicle automatically locks door when vehicle reaches speed greater than 10 MPH (15 km/h).
ULTRASONIC INTERIOR MONITORING CONTROL MODULE CODES

Code Description
00101 A4 Sedan
00102 A4 Avant
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.