Control Module: Application and ID

1998 Audi A8 Sedan (4D2) V8-3.7L (AEW)SECTION Application and ID

- Connect scan tool. Testing and Inspection





- Indicated on display (control module identification)

Transmission Control Module (TCM) Identification
- The TCM identification is dependent on manufacture status (data status).
- A control module identification may appear which is different than that in this example.
- TCM applications refer to parts supplier.

Example:
8DO927156N Part number
AG5 01V Automatic transmission 5 speed 01V
3.71 2V Engine type: 3.7 liter 2 valve
USA Market: USA
D23 EPROM (data status)
Coding 00002 Code: USA
WSC 01268 Dealership code of VAG 1551 scan tool with which last coding was carried out

CAUTION:
^ Part numbers are listed here for reference only.
^ Always check with your Parts department for the latest information.


RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.