Tightening Specifications

1 - 25 Nm (18 ft lb)
2 - Damper
3 - Clamp level
4 - TDC pointer
5 - Bolt
6 - Bolt
7 - 25 Nm (18 ft lb)
8 - Screw and washer assembly 55 Nm (41 ft lb)
9 - 25 Nm (18 ft lb)
10 - 25 Nm (18 ft lb)
11 - 25 Nm (18 ft lb)
12 - 80 Nm (59 ft lb)
13 - 25 Nm (18 ft lb)
14 - Center bolt
Tightening torque with special tool 2079: 350 Nm (258 ft lb)
Tightening torque w/o special tool 2079: 450 Nm (332 ft lb)
When bolt has been loosened, always replace
Install with locking compound AMV 00102
Lightly oil threads and contact surfaces

15 - Flanged nut 10 Nm (89 in lb)
16 - 45 Nm (33 ft lb)
17 - Slide ring
18 - 10 Nm
19 - Tensioning roller
20 - 45 Nm (33 ft lb)
21 - Camshaft drive belt (timing belt)
22 - Flanged nut 10 Nm (89 in lb)