SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSAUDI1998A8 SEDAN (4D2) V8-3.7L (AEW)REPAIR AND DIAGNOSISPOWERTRAIN MANAGEMENTCOMPUTERS AND CONTROL SYSTEMSINFORMATION BUSTESTING AND INSPECTIONCAN-BUS DATA EXCHANGE BETWEEN MOTRONIC ECM AND AUTOMATIC TCM
1998 Audi A8 Sedan (4D2) V8-3.7L (AEW)

CAN-Bus Data Exchange Between Motronic ECM and Automatic TCM

1998 Audi A8 Sedan (4D2) V8-3.7L (AEW)SECTION CAN-Bus Data Exchange Between Motronic ECM and Automatic TCM



CAN-bus Data Exchange Between Motronic ECM And Automatic Transmission TCM, Checking

- Check Diagnostic Trouble Code (DTC) memory for Transmission Control Module (TCM).
- Switch ignition off.







- Connect VAG1598/19 test box to ECM harness connector. Refer "Scan Tool Testing/Scan Tool Connecting and Initial Checks/VAG1598/19 Test Box, Connecting" Testing and Inspection
- Check wiring for open or short circuit between TCM and ECM/test box sockets A9 and A10.

If wiring is OK:
- Temporarily replace ECM and/or TCM.
- Generate readiness code. Refer "Monitors, Trips and/or Drive Cycle (Readiness Code)/Generating, Readiness Code" Testing and Inspection
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.