Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSAUDI1998A8 SEDAN (4D2) V8-3.7L (AEW)REPAIR AND DIAGNOSISCRUISE CONTROLTESTING AND INSPECTIONSCAN TOOL TESTING AND PROCEDURESMEASURING VALUE BLOCKS (FUNCTION 08)READING
1998 Audi A8 Sedan (4D2) V8-3.7L (AEW)
Reading
1998 Audi A8 Sedan (4D2) V8-3.7L (AEW)SECTION Reading
Initiating "Read Measuring Value Block"
Indicated on display
Rapid data transfer HELP
Select function XX
- Press buttons -0- and -8-. This selects "Read measuring value block", function 08.
Indicated on display
Rapid data transfer Q
08 - Read Measuring Value Block
- Press -Q- button to confirm input.
Indicated on display:
Read Measuring Value Block HELP
Input display group number XXX
- Input display group number 066 (engine must be running at idle)
- Press -Q- button to confirm input.
The selected measuring value block is now displayed in standard form.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.