Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSAUDI1998A8 SEDAN (4D2) V8-3.7L (AEW)REPAIR AND DIAGNOSISBODY AND FRAMESERVICE AND REPAIRSTEERING COLUMN TRIMTRIM FOR STEERING COLUMN SWITCH, REMOVING AND INSTALLING
1998 Audi A8 Sedan (4D2) V8-3.7L (AEW)
Trim For Steering Column Switch, Removing and Installing
1998 Audi A8 Sedan (4D2) V8-3.7L (AEW)SECTION Trim For Steering Column Switch, Removing and Installing
- Unscrew bolts (arrows) and remove trim -1-.
- Remove airbag unit driver side.
- Remove steering wheel.
- Remove lower gap cover in direction of arrow.
- Unscrew bolts -1- and remove handle -2- for steering column adjustment.
- Unscrew bolts -7- and -8- and remove lower trim for steering column switch -4-.
- If necessary disconnect connector for switch -6- or unscrew switch.
NOTE: In the illustration, trim for steering column switch > 06.97 is shown.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.