Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSAUDI1998A8 SEDAN (4D2) V8-3.7L (AEW)REPAIR AND DIAGNOSISBODY AND FRAMELOCKSPOWER LOCKSTESTING AND INSPECTIONSCAN TOOL TESTING AND PROCEDURESSELECTABLE FUNCTIONS WHEN USING VAG 1551/1552 OR VAS 5051
1998 Audi A8 Sedan (4D2) V8-3.7L (AEW)
Selectable Functions When Using VAG 1551/1552 or VAS 5051
1998 Audi A8 Sedan (4D2) V8-3.7L (AEW)SECTION Selectable Functions When Using VAG 1551/1552 or VAS 5051
Available functions
Scan tool V.A.G 1551 and The scan tool V.A.G 1552
Address words
00 Automatic test sequence
35 Central locking
Functions
01 Check Control Module Version 83
02 Check DTC Memory
03 Output Diagnostic Test Mode
05 Erase DTC Memory
06 End output
07 Code control module
08 Read Measuring Value Block
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.