Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSAUDI1998A8 SEDAN (4D2) V8-3.7L (AEW)REPAIR AND DIAGNOSISBODY AND FRAMELOCKSPOWER LOCKSTESTING AND INSPECTIONSCAN TOOL TESTING AND PROCEDURESEND OUTPUT (FUNCTION 06)
1998 Audi A8 Sedan (4D2) V8-3.7L (AEW)
End Output (Function 06)
1998 Audi A8 Sedan (4D2) V8-3.7L (AEW)SECTION End Output (Function 06)
End Output
- Press buttons -0- and -6-. This selects "End Output," function 06.
Indicated on display
Rapid data transfer Q
06 - End Output
- Press -Q- button to confirm input.
Indicated on display
Rapid data transfer HELP
Insert address word XX
- Switch off ignition.
- Disconnect harness connectors for the VAG 1551 scan tool
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.