Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSAUDI1998A8 SEDAN (4D2) V8-3.7L (AEW)REPAIR AND DIAGNOSISACCESSORIES AND OPTIONAL EQUIPMENTANTITHEFT AND ALARM SYSTEMSULTRASONIC SENSORSERVICE AND REPAIRINTERIOR MONITORING B-PILLAR SWITCH, REMOVING AND INSTALLING
1998 Audi A8 Sedan (4D2) V8-3.7L (AEW)
Interior Monitoring B-Pillar Switch, Removing and Installing
1998 Audi A8 Sedan (4D2) V8-3.7L (AEW)SECTION Interior Monitoring B-Pillar Switch, Removing and Installing
Removing
- Remove driver's side B-pillar trim.
- Disconnect electrical connector from switch.
- Using a small screwdriver, depress catch -A- and push switch through B-pillar trim.
Installing
- Install in reverse order of removal.
- Remove driver's side B-pillar trim.
- Disconnect electrical connector from switch.
- Using a small screwdriver, depress catch -A- and push switch through B-pillar trim.
Installing
- Install in reverse order of removal.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.