Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSAUDI1996A4 BASE, STANDARDREPAIR AND DIAGNOSISSTEERINGMANUAL STEERINGSTEERING SYSTEM - POWERTORQUE SPECIFICATIONS
1996 Audi A4 Base, Standard
Torque Specifications
1996 Audi A4 Base, StandardSECTION Torque Specifications
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | ||||
|---|---|---|---|---|---|
| Flexible Hose Bolt | 30 (40) | ||||
| Front Bumper Bolt/Washer Assembly | 17 (23) | ||||
| Ignition Coil Bracket Bolt | 18 (25) | ||||
| Lock Carrier Bolt | 37 (50) | ||||
| Lower Control Arm Nut | 45 (33) | ||||
| Return Hose Bolt | 37 (50) | ||||
| Steering Column Nut | 30 (40) | ||||
| Steering Damper Bolt | 26 (35) | ||||
| Steering Gear Mounting Bolt | 48 (65) | ||||
| Steering Pump Banjo Bolt (19 mm) | 30 (40) | ||||
| Steering Pump Banjo Bolt (22 mm) | 37 (50) | ||||
| Steering Pump Bracket & Mounting Bolt | 18 (25) | ||||
| Steering Pump Line Union | 37 (50) | ||||
| Steering Pump Pulley Bolt | 18 (25) | ||||
| Tie Rod End Nut(2) | 37 (50) | ||||
| Viscous Coupling (1) | 27 (37) | ||||
| Water Pump Pulley Bolt | 18 (25) | ||||
| Wheel Lug Bolt | 89 (120) | ||||
| INCH Lbs. (N.m) | |||||
| Cooling Fan-To-Viscous Coupling | 90 (10) | ||||
| Outer Tie Rod Adjusting Bolt | 62 (7) | ||||
| Pressure Line Bolt | 71 (8) | ||||
| Steering Damper Nut | 90 (10) | ||||
| Steering Gear Screw Plug | 120 (13) | ||||
| Suction Line Bracket Bolt | 71 (8) | ||||
| Upper Radiator Core Support Bolt | 71 (8) | ||||
|
|||||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.