Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSAUDI1996A4 BASE, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 15 (2.8L V6)ENGINE SPECIFICATIONSENGINE VALVES & VALVE SPRINGS SPECIFICATIONS
1996 Audi A4 Base, Standard
Engine Valves & Valve Springs Specifications
1996 Audi A4 Base, StandardSECTION Engine Valves & Valve Springs Specifications
WARNING: This page is about a different car, the 1996 Audi Cabriolet and 1995 Audi Cabriolet. However, it is still accessible from the selected car via links, so may be relevant.
VALVES & VALVE SPRINGS
| Application | Specification | |||||
|---|---|---|---|---|---|---|
| Intake Valves | ||||||
| Face Angle | 45° | |||||
| Installed Height (1) | 1.331" (33.8) | |||||
| Maximum Face Width | .138" (3.50 mm) | |||||
| Minimum Margin | .020" (.50 mm) | |||||
| Exhaust Valves (2) | ||||||
| Face Angle | 45° | |||||
| Installed Height (1) | 1.343" (34.1 mm) | |||||
|
||||||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.