Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSAUDI1996A4 BASE, STANDARDREPAIR AND DIAGNOSIS (SINGLE PAGE)EXTERNAL PAGESDIFFERENT CARSECTION 94 (MAINTENANCE)DESCRIPTIONS OF OPERATIONSON BOARD DIAGNOSTIC (OBD), CHECK DTC MEMORY (SCAN TOOL FUNCTION 02)CONNECTING VAG 1551 SCAN TOOL (ST)
1996 Audi A4 Base, Standard
Connecting VAG 1551 Scan Tool (ST)
1996 Audi A4 Base, StandardSECTION Connecting VAG 1551 Scan Tool (ST)
WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2005 Audi allroad, 2004 Audi allroad, 2004 Audi A6, 2003 Audi allroad, and 2003 Audi S6. However, it is still accessible from the selected car via links, so may be relevant.
- Place selector lever in position "P" or "N" and engage parking brake.
- With ignition off, connect VAG 1551 Scan Tool (ST) VAG 1551/3 adapter cable to Data Link Connector (DLC), located under driver's knee bar, to left of steering wheel.
- Switch printer on by pressing PRINT button (indicator light in button comes on).
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.