Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Description & Operation: Notes
Some vehicles are equipped with an Auto-Check system that monitors the condition of various vehicle systems. When a fault occurs in one of these systems, a symbol is displayed in the Auto-Check display window between the tachometer and speedometer. Radio and tape player information is also displayed in this window. Indicator lights in the instrument cluster are of 2 types: those that are part of the Auto-Check system and those that are not.
Some vehicles are equipped with a trip computer that records trip information (fuel consumption, etc.). When requested, this information is displayed in the trip computer display window in the center of the instrument cluster. The function control switches (rocker switch and RESET button) for the trip computer are on the right side of the steering column, on the end of the windshield wiper control lever.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.