Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSAUDI199590 QUATTRO SPORT V6-2.8L (AAH)REPAIR AND DIAGNOSISSTARTING AND CHARGINGSTARTING SYSTEMIGNITION LOCKIGNITION LOCK CABLETESTING AND INSPECTION
1995 Audi 90 Quattro Sport V6-2.8L (AAH)
Ignition Lock Cable: Testing and Inspection
1995 Audi 90 Quattro Sport V6-2.8L (AAH)SECTION Testing and Inspection
- Move selector lever to "P" position.
- Turn ignition key to full "off" position.
It must not be possible to move the selector lever into a drive position
Ignition key can be removed
- Turn ignition key to "on" position and move selector lever to drive position.
- Turn ignition key to full "off" position.
It must not be possible to remove the ignition key.
- Turn ignition key to full "off" position.
It must not be possible to move the selector lever into a drive position
Ignition key can be removed
- Turn ignition key to "on" position and move selector lever to drive position.
- Turn ignition key to full "off" position.
It must not be possible to remove the ignition key.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.