Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSAUDI199590 BASE, 2.8 K, AUTOMATICREPAIR AND DIAGNOSIS (SINGLE PAGE)ENGINE PERFORMANCESYSTEMENGINE CONTROLS - TESTS W/CODESSELF-DIAGNOSTIC TESTSREADING MEASURING BLOCK

1995 Audi 90 Base, 2.8 K, Automatic

Reading Measuring Block

1995 Audi 90 Base, 2.8 K, AutomaticSECTION Reading Measuring Block

NOTE: Display groups 00-19 in READING MEASURING BLOCK mode are identical to display groups 00-19 as described in ENGINE BASIC SETTING. Command for relearning given in ENGINE BASIC SETTING, display groups 07 and/or 08, is not accessible in READING MEASURING BLOCK mode.

Enter self-diagnostics. See ENTERING SELF-DIAGNOSTICS. Select function 08. Select appropriate display group number. Test value blocks 1-4 will now be displayed. Display group numbers 01-09 are displayed without a "0". To select display group numbers 10-17, press "C".

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.