Parking and Back-Up Sensor Control Unit Connector for Inputs and Outputs (2019, 2020, 2021)

2023 Acura RDX BaseSECTION Parking and Back-Up Sensor Control Unit Connector for Inputs and Outputs (2019, 2020, 2021)

Parking and Back-Up Sensor Control Unit 16P Connector (female terminals)Β 

GHH334115Courtesy of HONDA, U.S.A., INC.
Terminal number Terminal name Description
1 Not used ---
2 B-CAN_L Communication line
3 Not used ---
4 GND Ground for parking and back-up sensor control unit
5 C/SNSR_IND Detects C/SNSR_IND signal
6 SOF_SIDE_R Detects SOF_SIDE_R signal
7 BOF_SIDE_R Power source for front sensor
8 IG1_METER IG1 power source
9 B-CAN_H Communication line
10 Not used ---
11 Not used ---
12 E2_SIDE_L Ground for rear sensor
13 E1_SIDE_R Ground for front sensor
14 SOR_SIDE_L Detects SOR_SIDE_L signal
15 C/SNSR_SW Detects C/SNSR_SW signal
16 BOR_SIDE_L Power source for rear sensor
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.