Rear Individual Map Light Test: Test

How To Use This Service Information .

1. Rear Individual Map Light - Test

   Preconditions 

   • Rear Individual Map Light Removed

   Procedure/Specifications 

   • Check the light according to the table. (Figure 1 and 2)

     Figure 1 

     Courtesy of HONDA, U.S.A., INC.

     Figure 2 

     Courtesy of HONDA, U.S.A., INC.

   NOTE:

   • When an LED is located between terminals, check if the LED lights up by connecting power and ground to the LED.
   • Remember this important operating characteristic; diode bias causes a diode to fully conduct electricity in one direction (forward), while not at all in the opposite direction (reverse).

   Result 

   • If the result is not as specified, replace the rear individual map light.