Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSACURA2023INTEGRA A-SPEC, AUTOMATIC CVT TRANSREPAIR AND DIAGNOSIS (SINGLE PAGE)ACCESSORIES & EQUIPMENTGAUGES & INSTRUMENT PANELSGAUGE CONTROL SYSTEM DIAGNOSTICSDTC TROUBLESHOOTINGDTC U128F (GAUGE CONTROL MODULE)INSPECTION OUTLINE
2023 Acura Integra A-Spec, Automatic CVT Trans
Inspection Outline
2023 Acura Integra A-Spec, Automatic CVT TransSECTION Inspection Outline
- Refer to the troubleshooting for B-CAN Lost Communication - Refer to: Network Communications Symptom Troubleshooting - F-CAN Lost Communication (CAN BUS with Connection to CAN Gateway) or Network Communications Symptom Troubleshooting - F-CAN Lost Communication (CAN BUS without Connection to CAN Gateway) or Network Communications Symptom Troubleshooting - HDS does not communicate with the vehicle or Network Communications Symptom Troubleshooting - F-CAN BUS-OFF (CAN BUS without Connection to CAN Gateway) or Network Communications Symptom Troubleshooting - B-CAN Lost Communication .
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.