Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Start-Up Procedure and Diagnostic Menu
This diagnosis is applied to the audio unit (without navigation) only.
NOTE: Check the vehicle battery condition first - Refer to: Battery Test (2016 2017 2018 2019 2020) .
1. Start the engine.
2. At the disclaimer screen, use the center switch panel buttons:
Press and hold the INFO button, the SETTINGS button, and the BACK button for about 3 seconds or more. The center display unit and the ODMD (TM) goes directly to the diagnosis items menu shown:
- Center display unit screen:
- Self-Diagnosis Mode (runs the automatic diagnosis of the audio system)
- Detail Information and Setting (Can help you to manually diagnose the audio system)
- ODMD (TM) screen:
- Monitor Check (Can help you to manually diagnose the ODMD (TM))
CENTER DISPLAY UNIT
ODMD (TM)
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.