Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Engine cranks, but does not start
2018 Acura ILXSECTION Engine cranks, but does not start
Diagnostic procedure
- Check for PGM-FI DTCs .
- Check the PGM-FI main relays .
- Check for keyless access system symptom troubleshooting information .
- Check the fuel pressure .
- Check for a plugged or damaged fuel line .
- Check for a plugged fuel filter .
- Check the throttle body .
- Check for low engine compression .
- Check the camshaft timing .
- Do the PCM reset in the PGM-FI System to cancel ALL INJECTORS STOP with the HDS.
Also check for
- Fuel level in tank
- Weak or fouled spark plugs
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.