Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSACURA2015TLX BASE, 2.4L ENGREPAIR AND DIAGNOSIS (SINGLE PAGE)QUICK LOOKUPSDTC INDEXPARKING AND BACK-UP SENSOR CONTROL UNIT DTCS
2015 Acura TLX Base, 2.4L Eng
Parking And Back-Up Sensor Control Unit DTCS
2015 Acura TLX Base, 2.4L EngSECTION Parking And Back-Up Sensor Control Unit DTCS
2015-17
| DTC | Description | DTC type |
|---|---|---|
| B2601 | Parking sensor CPU error | Internal error |
| B2602 | Parking sensor EEPROM error | Internal error |
| B2625 | Left front sensor failure | Signal error |
| B2628 | Right front sensor failure | Signal error |
| B2629 | Left rear sensor failure | Signal error |
| B2630 | Center left rear sensor failure | Signal error |
| B2631 | Center right rear sensor failure | Signal error |
| B2632 | Right rear sensor failure | Signal error |
| B2635 | IND erroneous lighting | Signal error |
| B2636 | Vehicle status combination error | Signal error |
| B2637 | Sensor power failure | Signal error |
| B2638 | Front left sensor bus failure | Signal error |
| B2641 | Front right sensor bus failure | Signal error |
| B2642 | Rear left sensor bus failure | Signal error |
| B2643 | Rear left center sensor bus failure | Signal error |
| B2644 | Rear right center sensor bus failure | Signal error |
| B2645 | Rear right sensor bus failure | Signal error |
| U0155 - Refer to: DTC Troubleshooting: U0155 (Parking/Back-Up Sensor Control Unit) | Lost communication with gauge control module | Loss of communication |
| U1280 | B-CAN communication bus line error (BUS-OFF) | Loss of communication |
| U1282 | Lost communication with MICU | Loss of communication |
2018-20
| DTC | Description | DTC type |
|---|---|---|
| B2601 | Parking sensor CPU error | Internal error |
| B2602 | Parking sensor EEPROM error | Internal error |
| B2610 | Front 1st sensor failure | Signal error |
| B2611 | Front 2nd sensor failure | Signal error |
| B2612 | Front 3rd sensor failure | Signal error |
| B2613 | Front 4th sensor failure | Signal error |
| B2614 | Rear 1st sensor failure | Signal error |
| B2615 | Rear 2nd sensor failure | Signal error |
| B2616 | Rear 3rd sensor failure | Signal error |
| B2617 | Rear 4th sensor failure | Signal error |
| B2618 | Front 1st sensor data failure | Signal error |
| B2619 | Front 2nd sensor data failure | Signal error |
| DTC | Description | DTC type |
|---|---|---|
| B261A | Front 3rd sensor data failure | Signal error |
| B261B | Front 4th sensor data failure | Signal error |
| B261C | Rear 1st sensor data failure | Signal error |
| B261D | Rear 2nd sensor data failure | Signal error |
| B261E | Rear 3rd sensor data failure | Signal error |
| B261F | Rear 4th sensor data failure | Signal error |
| B2646 | Front sensor power failure | Signal error |
| B2647 | Rear sensor power failure | Signal error |
| B2648 | Front sensor signal short to ground | Signal error |
| B2649 | Rear sensor signal short to ground | Signal error |
| B264A | Indicator circuit short to power | Signal error |
| B264B | Indicator circuit short to ground | Signal error |
| B264D | Front sensor combination error | Signal error |
| U0155 - Refer to: DTC Troubleshooting: U0155, U1281 (Parking/Back-Up Sensor Control Unit) (2018-19) | Lost communication with gauge control module | Loss of communication |
| U1280 | B-CAN communication bus line error (BUS-OFF) | Loss of communication |
| U1281 - Refer to: DTC Troubleshooting: U0155, U1281 (Parking/Back-Up Sensor Control Unit) (2018-19) | Lost communication with MICU | Loss of communication |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.